Currently Empty: $0.00
Barrier Cable Glands for All Types of Armoured Cables
Mining, Gas, Dust applications
Ex I M2 – Ex db IMb Ex eb IMb
CERTIFICATES
Delivery and return
Delivery and return
Shipping Information
Shipping Information
Composition and care
Composition and care
Description
| Suitable for use in | Group I, Group II, Group III |
| Equipment Marking | EX I M2 Ex db I Mb, Ex eb I Mb EX II 2GD Ex db IIC Gb, Ex eb IIC Gb, Ex tb IIIC Db |
| Ingress Protection Rating | IP66, IP68 – 5 Bar, 30 min |
| Type Rating | TYPE 4X |
| Cable Gland Material | Brass, Brass Nickel Plated, Stainless Steel |
| Seal Material | Silicone |
| Operating Temperature | Silicone: -60°C to +100°C |
| Thread Type | Metric, NPT |
| Other thread types available upon request. | |
| Cable Type | Armoured (SWA, AWA, STA), Braided, Shielded |
| Accessories | Lock nuts, Gaskets (Washers), Serrated Washers, Shrouds, Earth tags |
| Remarks | Accessories must be ordered separately. O-ring available in Metric outer threads. |
| Product Certificates | |
| ATEX Approval | CESI 17 ATEX 007X |
| ATEX standards | EN 60079-0, 1, 7, 31 |
| IECEx Approval | IECEx CES 17.0029X |
| IECEx standards | IEC 60079-0, 1, 7, 31 |
| TR CU (EAC) | No TC RU C-TR.AA87.B.00941 |
| TR CU standards | ГОСТ 31610.0; ГОСТ IEC 60079-1, 7, 31 |
| Marine Approval | TAE00003WU |
| UKCA | CML 22UKEX1185X |
Technical
Product Selection Table
Showing:
| Thread Type METRIC acc. to ISO 965-3 | |||||||||||
Outer Thread Size (Male) |
Clamping Range
Ø min – max mm |
Over Conductors
Ø max mm |
Armour Wire
Ø max mm |
Outer Thread Length
TL |
Spanner Width | Outer ØD mm |
max. HeightH mm |
Part Number |
Needed Barrier Compound Mixture Per Pcs. (g) |
||
| Cap
SW Cap mm |
Upper Body
SW Upper Body |
Lower Body
SW Lower Body |
|||||||||
| M20x1,5 | 3,0 – 8,5 | 9,5 | 1,0 | 16,0 | 25 | 25 | 25 | 27,0 | 63,5 | KBCTA1XSM | 7 |
| 6,0 -13,0 | 9,5 | 1,3 | 16,0 | 25 | 25 | 25 | 27,0 | 63,5 | KBCTA1SM | 7 | |
| 8,0 – 15,0 | 9,5 | 1,3 | 16,0 | 25 | 25 | 25 | 27,0 | 63,5 | KBCTA1M | 7 | |
| 13,5 – 21,0 | 12,0 | 1,3 | 16,0 | 30 | 30 | 30 | 33,0 | 65,0 | KBCTA1LM | 9 | |
| M25x1,5 | 8,0 – 15,0 | 9,5 | 1,3 | 16,0 | 25 | 25 | 30 | 33,0 | 63,5 | KBCTA2SM | 7 |
| 13,5 – 21,0 | 12,0 | 1,3 | 16,0 | 30 | 30 | 30 | 33,0 | 65,0 | KBCTA2M | 9 | |
| 18,0 – 27,0 | 15,0 | 1,6 | 16,0 | 40 | 40 | 40 | 44,5 | 72,5 | KBCTA2LM | 20 | |
| M32x1,5 | 18,0 – 27,0 | 15,0 | 1,6 | 16,0 | 40 | 40 | 40 | 44,5 | 72,5 | KBCTA3M | 20 |
| 23,0 – 33,0 | 21,5 | 1,6 | 16,0 | 43 | 43 | 43 | 47,0 | 74,5 | KBCTA3LM | 31 | |
| M40x1,5 | 23,0 – 33,0 | 21,5 | 1,6 | 16,0 | 43 | 43 | 45 | 50,0 | 74,5 | KBCTA4SM | 31 |
| 29,0 – 40,0 | 29,0 | 2,0 | 16,0 | 50 | 50 | 50 | 55,5 | 82,5 | KBCTA4M | 60 | |
| M50x1,5 | 29,0 – 40,0 | 29,0 | 2,0 | 16,0 | 50 | 50 | 55 | 61,0 | 82,5 | KBCTA5SM | 60 |
| 35,0 – 48,0 | 37,0 | 2,5 | 16,0 | 58 | 58 | 58 | 64,0 | 90,5 | KBCTA5M | 90 | |
| M63x1,5 | 35,0 – 48,0 | 37,0 | 2,5 | 20,0 | 58 | 58 | 68 | 75,0 | 90,5 | KBCTA6SM | 90 |
| 42,0 – 56,0 | 46,0 | 2,5 | 20,0 | 75 | 75 | 75 | 83,0 | 120,0 | KBCTA6M | 193 | |
| M75x1,5 | 42,0 – 56,0 | 46,0 | 2,5 | 20,0 | 75 | 75 | 80 | 89,0 | 120,0 | KBCTA7SM | 193 |
| 54,0 – 70,0 | 58,0 | 3,2 | 20,0 | 100 | 100 | 100 | 110,5 | 126,0 | KBCTA7M | 337 | |
| M90x1,5 | 54,0 – 70,0 | 58,0 | 3,2 | 20,0 | 100 | 100 | 100 | 110,5 | 126,0 | KBCTA8M | 337 |
| Thread Type NPT acc. to ANSI ASME B1.20.1 | |||||||||||
| Outer Thread Size (Male) |
Clamping Range
Ø min – max mm |
Over Conductors
Ø max mm |
Armour Wire
Ø max mm |
Outer Thread Length
TL |
Spanner Width | Outer Ø
D |
max. Height
H |
Part Number |
Needed Barrier Compound Mixture Per Pcs. (g) |
||
| Cap
SW Cap mm |
Upper Body
SW Upper Body |
Lower Body
SW Lower Body |
|||||||||
| NPT 1/2″ | 3,0 – 8,5 | 9,5 | 1,0 | 21,0 | 25 | 25 | 25 | 27,0 | 63,5 | KBCTA1XSN | 7 |
| 6,0 – 13,0 | 9,5 | 1,3 | 21,0 | 25 | 25 | 25 | 27,0 | 63,5 | KBCTA1SN | 7 | |
| 8,0 – 15,0 | 9,5 | 1,3 | 21,0 | 25 | 25 | 25 | 27,0 | 63,5 | KBCTA1N | 7 | |
| 13,5 – 21,0 | 12,0 | 1,3 | 21,0 | 30 | 30 | 30 | 33,0 | 65,0 | KBCTA1LN | 9 | |
| NPT 3/4″ | 8,0 – 15,0 | 9,5 | 1,3 | 21,0 | 25 | 25 | 30 | 33,0 | 63,5 | KBCTA2SN | 7 |
| 13,5 – 21,0 | 12,0 | 1,3 | 21,0 | 30 | 30 | 30 | 33,0 | 65,0 | KBCTA2N | 9 | |
| 18,0 – 27,0 | 15,0 | 1,6 | 21,0 | 40 | 40 | 40 | 44,5 | 72,5 | KBCTA2LN | 20 | |
| NPT 1″ | 18,0 – 27,0 | 15,0 | 1,6 | 26,0 | 40 | 40 | 40 | 44,5 | 72,5 | KBCTA3N | 20 |
| 23,0 – 33,0 | 21,5 | 1,6 | 26,0 | 43 | 43 | 43 | 47,0 | 74,5 | KBCTA3LN | 31 | |
| NPT 1 1/4″ | 23,0 – 33,0 | 21,5 | 1,6 | 28,0 | 43 | 43 | 45 | 50,0 | 74,5 | KBCTA4SN | 31 |
| 29,0 – 40,0 | 29,0 | 2,0 | 28,0 | 50 | 50 | 50 | 55,5 | 82,5 | KBCTA4N | 60 | |
| NPT 1 1/2″ | 29,0 – 40,0 | 29,0 | 2,0 | 28,0 | 50 | 50 | 55 | 61,0 | 82,5 | KBCTA5N | 60 |
| NPT 2″ | 35,0 – 48,0 | 37,0 | 2,5 | 28,0 | 58 | 58 | 65 | 72,0 | 90,5 | KBCTA6N | 90 |
| NPT 2 1/2″ | 42,0 – 56,0 | 46,0 | 2,5 | 41,0 | 75 | 75 | 80 | 89,0 | 120,0 | KBCTA7N | 193 |
| NPT 3″ | 54,0 – 70,0 | 58,0 | 3,2 | 43,0 | 100 | 100 | 100 | 110,5 | 126,0 | KBCTA8N | 337 |
| *Barrier compound is served as 50 g standard. | |||||||||||
